Tech Paintball Gear

Tippmann and BT Markers have been blessed with amazing RELIABILITY, but cursed with MASSIVE AMOUNTS KICK during their firing cycle. Until now...

The Zero Kick Hammer SE™ is the most profound performance upgrade you will ever experience in a Tippmann style marker. Using our patent pending MRT Technology™, we have reduced the internal moving mass of the hammer assembly by nearly half. Say goodbye to the clunky, "kickin' like karate", hand-numbing operation that you have come to expect from Tippmann style markers.

Say hello to a new age of smoother cycling, higher rates of fire,
and above all else...Substantially Less Kick!

Not only does the lightened weight of the Zero Kick Hammer SE create less kick, it allows for higher rates of fire and a lower mechanical dwell. This lighter weight allows the Zero Kick Hammer to move back and forth more quickly. This means that you can fit more shots into any given amount of time, commonly called rate of fire or bps (balls per second). This lighter weight and faster cycle also means that the amount of time between when the trigger is pulled and the ball exits the barrel is less than the stock. By being able to move faster, the Zero Kick Hammer reaches and opens the valve faster than stock. This means air is released to propel the ball down range sooner.

Price :

RM230.00 exclude postage fee

The TechT "Ludicrous Speed" Complete Cyclone Feed Upgrade Kit is the combination of all of our Cyclone Feed Upgrades.

Our parts replace the stock Tippmann parts in your Cyclone Feed and allow it to operate at it's maximum potential. Loading speed, air efficiency, and reliabilty all are increased by our parts dramatically.

Say good bye to the days of your cyclone chewing up the stock plastic ratchets that cause you headaches at the field. If your cyclone skips shots, its time to change out your parts before they totally breakdown on the field.

Fits all Cyclone Feeds for A5, X7, 98's and Phenoms

The TECHT Quick-Strip Pin Set is a STAINLESS STEEL body pin upgrade allows Tippmann Users to quickly and easily assemble or disassemble their marker. The stock pins are made from cheap pot metal that can break and be difficult to install and even harder to remove.  

The TECHT Quick-Strip Pin Set is the only Stainless Steel body pin upgrade kit in the world. It takes function and durability to the next level.

The kit works with all A5, X7, or Phenom markers. The same kit will work for all of the listed markers.

A set of skull decals are also included with the TECHT Quick-Strip Pin Set. You have the option of using them or not. 

The decals are also sold separately
for those happy with their stock pins but would like the skull decal on their pins.

Designed for maximum performance, the TechT Fang Trigger for the X7 Phenom is a must for anyone looking to upgrade their marker. The Fang Trigger allows for maximum andjustment, comfort, and speed.

The Fang Trigger allows you to minimize trigger travel with two adjustment screws, and dual roller bearing design maximize your BPS like never before.

100% Aluminum and USA made. The Fang Trigger is the most durable, best feeling, overall best performing, and lets not forget the BEST looking trigger you will find for the X7 Phenom.

When trying to achieve the best trigger pull,trigger tension is crucial. For that reason we include our Variable Tension Trigger Spring Kit. Each of our 3 springs has different strengths. They range in strength from Extremely Soft for walking the trigger super fast, to Firm for all those tough 1-finger type guys.

In this picture you can see the lightest spring being used.

As seen below, the Fang Trigger includes all adjusting screws, springs, and double trigger guard.

.

TechT's Hush Bolt for Spyder markers utilizes our new "Even-Flow" venturi face technology. This new "Even-Flow" face allows the Hush Bolt to obtain optimal efficiency, while also quieting the sound signature. The Spyder hush bolt is also much lighter which aids in reducing kick when firing the marker.

Other bolt features include our ramping detents grooves which make for a much easier transition for the ball detents during each shot. The detents no longer get hung up on the face orings on the bolt return. We also added the perfect angled ramp to the face of the bolt that prevents ball clipping (chopping) and also gently pushes the ball detents down on the forward bolt stroke. All in all, we designed this bolt to perfection. The result is a bolt that is the quietest, most air efficient, most durable, and softest on the detents and balls.

Features of the TechT Azodin Hush Bolt

Quiet Operation- the Hush Bolt was designed to have a less abrupt "pop" or "crack" that has traditionally been associated with blowback markers. The TechT Hush Bolt has a quieter, more muffled sound signature. This means your field position is given away less, and communication on the field becomes easier than ever before.

Increased Efficiency- the combination of the Even-Flow face and our unique o-ring configuration allows the Hush Bolt to seal the routing of air directly through the face. This results in less air being leaked around the bolt itself- which means far less wasted air. The Even-Flo Face also allows for extremly unform airflow- this means tighter groupings and better accuracy.

Radial Ramping Face- our Hush Bolt features a Radial Ramping Face which allows for less ball stack clipping, which means less broken paint in your breech. R.A.D.- Our Ramp Assisted Detent groove allows for much smoother operation, and prolongs the life of your ball detents.

TECHT's Hush Pro Series Bolt for the Planet Eclipse Ego and Etek marker series utilizes our "Even-Flow" venturi face technology. This "Even-Flow" face allows the Hush Bolt to obtain optimal effeicency, while quieting the traditional sound signature associated with the Ego and Etek significantly.

The Hush Bolt is not only quiter, it is lighter and smoother! The HUSH Bolt is made from 900 SP Series Delrin which makes it cycle smoother and has lower wear and friction properties.900 SP Series Delrin makes the Hush Bolt smoother than ever! TechT opted for this new material because it has much better wear resistance than standard delrin. This means your bolt will maintain optimal performance much longer than other bolts, and not scratch near as easily. The Hush Bolt also pushes the limits of weight reduction while not compromising the velocity limits of the stock rammer. Whether you choose the Hush Pro Series Bolt or our Kush Pro Series you can rest assure that you are getting one of the best Ego bolts on the market.


The TECHT Pro Series Hush Bolt incorporates all the benefits of the older version of the Hush Bolt but has added anti-friction cuts to minimize drag and breech wear. Similar bolt mods (props to Pooty) have been seen but cost additional money and time in transit, not to mention void your TECHT Lifetime Warranty. Our anti-friction cut style allows for no wasted air in the detent portion of the bolt. This means players are getting the lightest, quietest, most efficient, & friction free bolt on the market and all at the same price as older Hush Bolt designs.

Other bolt features include our ramping detents grooves which make for a much easier transistion for the ball detents during each shot. The detents no longer get hung up on the face orings on the bolt return. We also added the perfect angled ramp to the face of the bolt that prevents ball clipping (chopping) and also gently pushes the ball detents down on the forward bolt stroke. All in all, we designed this bolt to perfection.

Highlights of the TechT Ego Hush Bolt

Quiet Operation- the Hush Bolt was designed to have a less abrupt "pop" or "crack" that has traditionally been associated with Ego Markers. The TechT Hush Bolt has a quieter, more muffled sound signature. This means your field position is given away less, and communication on the field becomes easier than ever before.

Increased Efficiency- the combination of the Even-Flow face and our unique o-ring configuration allows the Hush Bolt to seal the routing of air directly through the face. This results in less air being leaked around the bolt itself- which means far less wasted air. The Even-Flo Face also allows for extremely uniform airflow- this means tighter groupings and better accuracy.

Super Light Design- the Hush Bolt weighs in at only grams 14.9 Grams! (o-ringed/ without the pin)
100% 900 SP Series Delrin construction means you are getting the lightest, fastest bolt possible. The use of 900 SP Series Delrin allows for a smoother more wear resistant bolt.

Radial Ramping Face- our Hush Bolt features a Radial Ramping Face which allows for less ball stack clipping, which means less broken paint in your breech.

R.A.D.- Our Ramp Assisted Detent groove allows for much smoother operation, and prolongs the life of your ball detents.